Articles
Relay Buddy - Automotive Relay Tester
Parent Category: New Tools
Electronic Specialties 190
• Tests 4/5 Pin Relays - 3 different relay types
• Tester uses 12V battery from vehicle, cycles the relay 10 times
• Relay Buddy will fail the relay if one of the cycles proves unsuccessful during the test
• Automatic Test with Good/Bad Indication - switch contacts loaded to detect excessive resistance
• Quick and easy "off the car" relay test
• Tester uses 12V battery from vehicle, cycles the relay 10 times
• Relay Buddy will fail the relay if one of the cycles proves unsuccessful during the test
• Automatic Test with Good/Bad Indication - switch contacts loaded to detect excessive resistance
• Quick and easy "off the car" relay test
Relay Buddy is a quick go / no-go tester for the most common automotive relays. It provides
you with an indication of the general health and functioning of the relay switch contacts and
coil. Relay Buddy will check the control side of the relay by applying a signal to the relay coil
while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay
several times during each test session as it watches for consistency in every cycle. Relay
Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful
during the test session.
you with an indication of the general health and functioning of the relay switch contacts and
coil. Relay Buddy will check the control side of the relay by applying a signal to the relay coil
while it checks for proper functioning of the relay contacts. Relay Buddy operates the relay
several times during each test session as it watches for consistency in every cycle. Relay
Buddy will fail the relay and light the RED LED if any one of the cycles proves unsuccessful
during the test session.
New Tools
Relay Buddy - Automotive Relay Tester
Electronic Specialties 190
• Tests 4/5 Pin Relays - 3 different relay types
• Tester uses 12V battery from vehicle, cycles the relay 10 times
• Relay Buddy will fail the relay if one of the cycles proves unsuccessful during the test
• Automatic Test with Good/Bad Indication - switch contacts loaded to detect excessive resistance
• Quick and easy "off the car" relay test
• Tester uses 12V battery from vehicle, cycles the relay 10 times
• Relay Buddy will fail the relay if one of the cycles proves unsuccessful during the test
• Automatic Test with Good/Bad Indication - switch contacts loaded to detect excessive resistance
• Quick and easy "off the car" relay test
Read more...
Don't end up with oil on the floor and your hands
The oil change is the #1 routine maintenance procedure performed by DIYers and Professionals in the U.S.A. Filters are designed to retain oil for proper operation and lubrication of the engine. This oil leaks from the filter once the filter is unscrewed. DIYers end up with oil on the garage floor and hands.