Articles

Don't end up with oil on the floor and your hands

Parent Category: New Tools

STGOFRKIT2.1
The oil change is the #1 routine maintenance procedure performed by DIYers and Professionals in the U.S.A. Filters are designed to retain oil for proper operation and lubrication of the engine.  This oil leaks from the filter once the filter is unscrewed.  DIYers end up with oil on the garage floor and hands.

 
Professionals work on “hot” vehicles.  Leaking oil is hot, causing a potential safety issue.  Professionals end up with possible customer returns, as oil gets trapped in suspension components and plastic shrouds,  leaking on the customers’ floor, later.
Use the patent-pending oil filter removal tool to protect your hands, capture the excess oil, and eliminate the mess! 

How it’s used:
  1. While the filter is on the vehicle, slide the tool on the filter.  The inside of the tool is grooved so it forms a good grip on the filter.
  2. The flexible bellows will seal against the engine block.
  3. Loosen the filter with a 3/8” drive ratchet (insert in the square opening on the bottom of the tool).
  4. Reverse the ratchet direction to loosen the tool from the filter.
  5. Remove!  The excess oil is retained in the tool!  No more oil on your hands, floor or undercarriage!

Comes in three sizes which will cover almost 90% of the cars and light trucks on the market in the U.S.A.!

Kit includes wrenches: OFR01, OFR02 & OFR03
Also sold separately

Purchase

Thursday the 17th. Joomla 2.5 templates. Copyright 2012 Automotive Specialty Tools, LLC